Composition
Plywood panel made of outer faces peeled exotic Ilomba with poplar inner-layers.
Outer faces with longitudinal grain.

Features
Versatility, high uniformity of the surfaces.
It is an ideal support for the coating with many decorative materials and forms as a component in the realization of many composites.

This type of plywood is classified into different classes depending on the appearance of the face (SIDE A) and the reverse (SIDE B).

	Class II (formerly Class B under UNI 6471) “Natural” face, with chromatic changes and sound knots, suitable for laminating with rolled section, pigmented varnishes or lacquer. Adherent sound knots are allowed up to a 35 mm diameter, as well as small deciduous knots or cracking. Moreover, low contrast colourings, occasional adhesive stains, well done repairs and stuccoes are allowed too.
	Class III (formerly Class BB under UNI 6471) “Open” face, stuccoed upon request, suitable for non visible uses. Adherent sound knots are allowed up to a 50 mm diameter; as well as deciduous knots, cracking, bark inclusions and overlapped parts. Colourings are allowed, provided that they are sound, as well as adhesive stains, repairs and stuccoes of any extent.

The bonding quality

Ilomba plywood can be manufactured with the following types of adhesive:

• Class 1: for use in dry environments (dry indoors) pursuant to UNI EN 314, urea adhesive.
• Class 2: for use in humid environments (sheltered outdoors) pursuant to UNI EN 314, melamine-urea adhesive.
• Class 3: for outdoor use (unsheltered outdoors) pursuant to UNI EN 314, melamine-urea adhesive.

Bonding upon request:
Only for bonding Class 1, Ilomba Twin plywood can be manufactured according to the requirements of CARB phase 2 emission standards.